Locksmiths Cwmbran provide a 24 hour one stop lock opening service for PVC Multipoint door locks in Cwmbran, we can also replace broken Multipoint locking systems on plastic doors.
Mr Locks is a local Cwmbran lock company approved by the Master locksmiths Association. Our experienced and highly trained engineers can arrive at site within the hour, and specialise in opening broken or jammed Multipoint PVC Door locks without causing damage.
We stock approximately 200 different makes and types of Multipoint PVC door locks on our mobile workshops which allow us to complete 98% of jobs on-site without the need for a return visit, resulting in lower costs to our customers and reduced overheads for ourselves.
So if you need to open or replace a Multipoint PVC Door Lock at your home or business, call your local Cwmbran locksmith free on 0800 083 2882. Mobile users can also call on 07976 961473. Rest assured we won't let you down!
Mr Locks specialise in opening PVC doors in Cwmbran with broken multipoint locking systems. Surprisingly, customers can be locked in, as well as being locked out of their property. Mr Locks your local Cwmbran based Master Locksmiths get called to these situations on a daily basis, we have the knowledge and experience to open you door without causing damage and replace the multipoint lock system in one visit.
Locksmiths Cwmbran are called to replace Multipoint Locking Systems on PVC doors on a daily basis, and stock approximately 200 different makes and types of multipoint locks on our mobile workshops. We are polite & helpful, we turn up when agreed, and we finish the job properly in one visit, not too much to ask is it.
Your local Cwmbran locksmith can upgrade older multipoint locking systems on PVC doors to more modern higher security specifications. Typically the more modern multipoint door locks have more locking points and either deadbolts or hook bolts which locate further into the frame receivers and prevent the door from being forced.
Listed below are some of the most common faults that we come across on a daily basis working on multipoint locking systems in the Cwmbran area:
Unable to lock the door when the handle is lifted:
This would normally indicate that the door is out of alignment with the door frame or the multipoint locking unit is broken. Try lifting the handle and locking the door with the door open if it works ok the door is not aligned properly, if it still doesn't lock the multipoint locking system is probably broken and needs to be replaced.
Unable to lock or un-lock the door, handle has gone floppy :
This is one of the most common problems that we here when customers call us and unfortunately it almost always indicates that the multipoint locking system is broken and must be replaced.
Unable to un-lock the door, key is also not turning fully:
If the key turns part way and then stops dead or becomes jammed it would normally indicate that the mechanism in the multipoint locking mechanism is defective and the multipoint locking mechanism needs to be opened and replaced.
Unable to un-lock or lock the door handle spins all the way around :
This is another common problem that customers advise us of, and it almost always indicates that the follower mechanism in the multipoint locking system has broken, and the locking system needs to be replaced. Although on the odd occasion we find that this can also be caused by a problem with the drive spindle in the lever handle.
For more information about multipoint locking systems on PVC doors in the Cwmbran area contact Mr Locks your local Cwmbran Master locksmiths Free on 0800 083 2882. Mobile users can also call on 07976 961473. We are polite & helpful, we turn up when agreed, and we finish the job properly in one visit, not too much to ask is it?